Kenmore Washer Repair (Model 110.47789701) – Alliance, OH
The washer displayed a SUD error during the rinse cycle, preventing it from washing clothes. The issue was likely due to excessive soap usage or failing bearings.
The washer displayed a SUD error during the rinse cycle, preventing it from washing clothes. The issue was likely due to excessive soap usage or failing bearings.
The temperature dial on this GE dryer stopped functioning, causing inconvenience. Replacing the cracked timer knob restored its operation.
The water valve on the washer wouldn’t shut off, leading to continuous water flow. Replacing the valve resolved the issue.
The washer displayed an OF error code and wasn’t draining properly. After replacing the cold water valve, the issue was resolved.
The dryer was not spinning properly, and the idler pulley was replaced to resolve the issue.
The dishwasher was stuck in the wash cycle and wouldn’t advance. A new sensor was installed to resolve the issue.
The washer was leaking from underneath but still functioning. A corroded hose was shortened to address the issue.
The washer displayed an error code F6 E2, indicating a user interface issue. Cleaning and sealing the board resolved the problem.
The washer stopped before completing the wash cycle, but after replacing the bearing kit and shaft, it now runs smoothly.
Ice buildup on the vent was resolved by replacing the damper motor and adjusting the defrost timer.