A Samsung dryer on E 12th Street in Alliance started making a loud screeching sound when turning it on. We found a worn idler pulley that needed replacement, along with support rollers that required cleaning and lubrication. The Problem Saturday, it started making a loud screeching sound when turning it on. The customer contacted us … Read more
We got a call from Alliance about a Maytag dryer that runs but won’t spin. The drum wasn’t turning at all even though the motor was running. After removing the front panel, we found the drive belt had snapped completely. The Problem The customer reported their dryer runs but won’t spin. The motor would start … Read more
A customer in Alliance called about their Whirlpool washer showing an error code for the door and refusing to start on any setting. After using the manual release to retrieve their laundry, the machine remained completely unresponsive. We found a simple but critical alignment issue that had disabled the entire wash cycle. The Problem The … Read more
Oven was dead due to a failed clock/control board. Replaced the control panel/board and restored normal operation.
A GE dryer on Parkside Drive in Alliance, OH wouldn’t turn on at all despite the homeowner checking the breaker. We found the drum drive belt had snapped completely, preventing the unit from operating. The Problem The customer reported their dryer won’t turn on at all. They had already checked the breaker to rule out … Read more
A Kenmore washer on Edison Street in Alliance, OH was leaking water when it spins out and rumbling loudly while spinning. Our diagnosis revealed the bearings had failed, causing water to leak onto the floor during the spin cycle. The Problem The customer reported their Kenmore washer was leaking water when it spins out and … Read more
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
A customer in Alliance called about their Admiral washer that would lock when turned on but go straight to pause. The door didn’t seem to latch well, and they had recently replaced the plastic latch. We found the door latch lock assembly had failed — a common issue with these machines. The Problem The washer … Read more
A KitchenAid dishwasher at a home on Roseland Road in Alliance wasn’t cleaning dishes properly due to low water flow. Our diagnosis revealed the unit was cycling correctly, but needed a thorough cleaning cycle to restore proper performance. The Problem The customer reported their dishwasher doesn’t clean dishes and noticed low water flow during operation. … Read more
We responded to a service call in Alliance, OH for a KitchenAid dishwasher that was leaking around the front door. The customer had already replaced the tub seal, but the unit was still leaking around the sump area and they opted for a new dishwasher instead of continuing repairs. The Problem The customer reported their … Read more